Ali Fitness Equipment
1 Universal General Treadmill Motor Controller Control board Treadmill instrument Display Circuit Panel 1-2.0HP 1-4.0HP DC Motor
1 Universal General Treadmill Motor Controller Control board Treadmill instrument Display Circuit Panel 1-2.0HP 1-4.0HP DC Motor
ไม่สามารถโหลดความพร้อมในการรับสินค้าด้วยตนเองได้
Compatibility issues:：
1. Standard version:
compatible with 90% of treadmill brands, but must ensure DC motor + 3-pin inclination sensor.
(Not supported by some Pro-Form / Nordic Track / Horizon / Johnson treadmills).
2. Pro-Form & Nordic Track:
Icon/IFIT treadmills, this brand uses a "special program" inclination motor (2-pin or 3-pin), whether it is 2-pin/3-pin, the "inclination function" of the standard version cannot be used. (It is not recommended to order the "Standard version").
If you need the correct Pro-Form / Nordic Track control system, please order through this link:
Specifications & List：
1. Part Model: Treadmill DC Universal Control System
2. Application: for treadmill repair.
3. Quantity: Control Systemr or only-lower control * 1pcs. （Please see option picture）
4. For 110V or 220V use.
5. Warranty time: 90 days.
6. Stocking time: 1-7 days.
MAX speed: 12km/h
220V AC input(leave message for 110V or other), Apply for DC motor 90V-260V
A. If there is an incline function, make sure the incline motor is a 3-pin incline sensor.
B. Speed sensor: The system can set the mode, can not connect the speed sensor or 3-pin speed sensor.
This controller set can work 100% without a speed sensor, so no need to worry. ↓
Please make sure:
a. Motor performance OK
b. Transmit function OK, especially belt, lubrication normal.
c. Only work for home treadmill use DC motor.
Product function & wiring ↓
For other wiring diagrams, please contact customer service.
1-4.0HP with incline ↓
1-4.0HP with no incline ↓
1-2.0HP with incline ↓
1-2.0HP with no incline ↓
More product introduction ↓
Size: 130mm * 100mm * 70mm
Input voltage:[AC] AC85V ~ 255V
Sensor mode: Magnetic sense / light perception / no sense
Features:
1: set the sensor mode by setting; set the minimum speed and maximum speed; set the output torque size; speed calibration
2: overcurrent and speed protection
3: Output short circuit or open circuit protection
【Display:】 digital tube, LED display; touch button;
【Display content】: treadmill speed, exercise time, movement distance, calories and slope
【Key Function:】 start / stop key, mode setting key, speed plus or minus key, slope plus or minus key, speed shortcut key, slope shortcut key;
【Dashboard function:】 countdown mode, distance countdown mode, calorie countdown mode, motion built-in program;
【Installation:】 can be fixed with double-sided adhesive in the original shell surface; or embedded into the original treadmill instrument panel display window;
Instructions
1: press the start button, there are 3 seconds countdown, treadmill began to run;
2: press the stop button, treadmill slow down and stop
3: mode key: standby, press the mode key, enter the run mode settings;
4: After the treadmill is started, adjust the speed by speed addition or subtraction or speed shortcut keys
5: After the treadmill is started, adjust the treadmill slope by raising the plus or minus key
Please make sure that the motor is in working order before placing your order. How to identify whether the motor is in working order ↓
1.Use 2-3PCS 5# batteries
2.Connect like photo
3.See motor running or not
User Feedback ↓
Feedback is the breakfast for the champion.Your feedback is very improtant to our business development and gauge of how can we doing. We sincerely invite you to leave positive feedback for us service.If you are satsdfied with our products and services.
